Categories
Home > Knowledge > Content

How To Install Stainless Steel Solvent Filter? Laboratory Filtration Apparatus Lab Supplies

Edit: Toption Instrument Co.,Ltd    Date: Jul 20, 2017
source: TOPTION lab solution provider

How To Install Stainless Steel Solvent Filter? Laboratory Filtration Apparatus Lab Supplies

stainless steel vacuum filter.jpg

How to install stainless steel filter, laboratory filtration apparatus installation steps:

1. According to the picture show, install from down to up, clockwise rotate the filter head components first, twist over the valve on support shelf.

2. Put the filter membrane dam-board on the filter head, board's target torus upward, the side has a very porous downward, a part of filter membrane dam-board sank in the funnel of the filter head, ensures the filter membrane dam-board without excursion.

3. Put the microporous membrane filter (50mm diameter) flat on the filter membrane dam-board, not inclined to one side, in case of leak.

4. Put the filter bowl on the filter membrane dam-board.

5. Use aluminium alloy clamp to tight the filter bowl and filter head.

6. Pour the filtered liquid into the filter cup, cover the lid.

7. Connect the liquid collection bottle and vacuum pump, power on the vacuum pump, by rotating each couplet switch valve to control the liquid filter in the filter bowl.

8. After filtering, the filter must be clean, dry and set aside.

stainless steel solvent filter, laboratory filtration apparatus.jpg

More vacuum laboratory filtration apparatus customize welcome contact info@toptionlab.com 24h/7days service.


Feedback
Your comments are welcome!
For more information about our brand and products, please feel free to contact us!
Please enter your email address:
Contact Us
Address: TaiBai Road, YanTa District, Xi'an, China
Tel: 0086-29-88763980
Fax: 0086-29-88990306
E-mail: info@toptionlab.com
Copyright © Toption Instrument Co.,Ltd All rights reserved.